Front Wiper Rubber: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for both the RH and LH sides.
The procedure described below is for the LH side.

REMOVE FRONT WIPER BLADE
1. Disengage the claw as shown in the illustration.
  NOTE: Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.
  
  Fig 1: Identifying Front Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT WIPER RUBBER
1. Remove the wiper rubber from the wiper blade.
  
  Fig 2: Identifying Wiper Rubber From Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 wiper rubber backing plates from the wiper rubber.
  
  Fig 3: Identifying Wiper Rubber Backing Plates From Wiper Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002