Front Wiper Rubber: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FRONT WIPER RUBBER
1. Install the 2 wiper rubber backing plates onto the wiper rubber.
  NOTE: Install the backing plates facing the correct direction.
  
  Fig 1: Identifying Wiper Rubber Backing Plates Onto Wiper Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the wiper rubber with its head portion (swelled portion) facing the arm bearing.
  NOTE: Push the wiper blade into the grooves of the wiper rubber to attach it completely.
  
  Fig 2: Identifying Wiper Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WIPER BLADE
1. Engage the claw and install the wiper blade.
  
  Fig 3: Identifying Front Wiper Blade
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002