On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT WIPER MOTOR
1. Check the automatic stop position.
  1. Operate the front wiper motor, then stop the operation.
  2. Check the automatic stop position when the front wiper motor operation has stopped.
    Standard:
    
    Front wiper arm stops in the position shown in the illustration.
  Fig 1: Identifying Front Wiper Motor Blade Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002