Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

This circuit uses the CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system will be output.

RECONFIRM DTC

Clear the DTC.
Start the engine.
Drive the vehicle at a speed of 15 km/h (9 mph) and turn the steering wheel to the right and left.
Check that no CAN communication system DTC is output.

If ABS and VSC DTCs are output, record them.

Result:

RESULT REFERENCE

Result	Proceed to
DTC is output for the CAN communication system	A (see HOW TO PROCEED WITH TROUBLESHOOTING )
DTC is output (ABS and VSC DTCs are output)	B
DTC is not output	C

B: REPAIR CIRCUIT INDICATED BY OUTPUT CODE

C: END

A: Go to CAN COMMUNICATION SYSTEM