LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Brakes - Abs With VSC (Diagnostics)) >> Vehicle Stability Control System >> DTC C1243/43, C1245/45: Acceleration Sensor Stuck Malfunction; Acceleration Sensor Output Malfunction >> Description

DTC C1243/43, C1245/45: Acceleration Sensor Stuck Malfunction; Acceleration Sensor Output Malfunction: Description

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION CONDITION AND TROUBLE AREA REFERENCE

DTC No. DTC Detection Condition Trouble Area
C1243/43 When vehicle speed becomes 0 km/h (0 mph) from 30 km/h (18 mph), and the condition that GL1 and GL2 signals of ECU terminals did not change 40 mV or less continued in a sequence 16 times.
  • Deceleration sensor
  • Wire harness for deceleration sensor system
C1245/45 At the vehicle speed of 30 km/h (18 mph) or more, and the condition that the difference between acceleration and deceleration values of computation from deceleration sensor and vehicle speed becomes more than 0.35 G continues for 60 sec. or more.