Throttle Body: Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard resistance
TESTER CONNECTIONS SPECIFIED CONDITIONS CHART
| Tester Connection |
Specified Condition |
| 1 (M-) - 2 (M+) |
0.3 to 100 Ω at 20°C (68°F) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the throttle with motor body assembly.