LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Control System (1NZ-FE)) >> SFI System >> DTC P050A Cold Start Idle Air Control System Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART

Battery voltage 8 V or more
Time after engine start 3 seconds or more
Starter OFF
ECT at engine start -10°C (14°F) or more
ECT -10 to 50°C (14 to 122°F)
Engine idling time 3 seconds or more
Fuel cut OFF
Vehicle speed Less than 1.875 mph (3 km/h)
Atmospheric pressure 76 kPa (570 mmHg) or more