Camshaft Timing Oil Control Valve Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE ENGINE UNDER COVER RH
REMOVE CYLINDER HEAD COVER NO. 2 (See REMOVAL )
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE FAN BELT ADJUSTING BAR
1. Remove the bolt and nut and remove the fan belt adjusting bar.
  
  Fig 1: Identifying Fan Belt Adjusting Bar With Bolt And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Disconnect the camshaft timing oil control valve assembly connector.
  
  Fig 2: Identifying Camshaft Timing Oil Control Valve Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and nut and remove the camshaft timing oil control valve assembly.
  
  Fig 3: Identifying Camshaft Timing Oil Control Valve Assembly With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the O-ring from the camshaft timing oil control valve assembly.
  
  Fig 4: Identifying Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002