Valve Body: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MANUAL VALVE
1. Coat the manual valve with ATF, and install it onto the valve body.
  
  Fig 1: Identifying Manual Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 SOLENOID LOCK PLATE
1. Install the shift solenoid valve SLT onto the valve body.
2. Install the solenoid lock plate onto the shift solenoid valve SLT.
3. Install the shift solenoid valve ST onto the valve body.
4. Install the No. 3 solenoid lock plate onto the valve body with the 2 bolts.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
  
  Fig 2: Identifying Bolts And No. 3 Solenoid Lock Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE SLU
1. Install the shift solenoid valve SLU onto the valve body.
2. Install the solenoid lock plate with the bolt.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
  
  Fig 3: Identifying Bolt And Solenoid Lock Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE S2
1. Install shift solenoid valve S2 with the bolt.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
  
  Fig 4: Identifying Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE S1
1. Install shift solenoid valve S1 with the bolt.
  Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf)
  
  Fig 5: Identifying Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002