LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Automatic Transmission - U340E) >> Valve Body >> Disassembly

Valve Body: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT SOLENOID VALVE S1 
    1. Remove the bolt and pull out shift solenoid valve S1.
      Fig 1: Identifying Bolt
      G05591410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SHIFT SOLENOID VALVE S2 
    1. Remove the bolt and pull out shift solenoid valve S2.
      Fig 2: Identifying Bolt
      G05591411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT SOLENOID VALVE SLU 
    1. Remove the bolt and the solenoid lock plate.
      2. Fig 3: Identifying Bolt And Solenoid Lock Plate
      G05591412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull out the shift solenoid valve SLU.
  4. REMOVE NO. 3 SOLENOID LOCK PLATE 
    1. Remove the 2 bolts and No. 3 solenoid lock plate from the valve body.
      2. Fig 4: Identifying Bolts And No. 3 Solenoid Lock Plate
      G05591413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull out the shift solenoid valve ST from the valve body.
    3. Remove the solenoid lock plate from the shift solenoid valve SLT.
    4. Pull out the shift solenoid valve SLT from the valve body.
  5. REMOVE MANUAL VALVE 
    1. Remove the manual valve from the valve body assembly.
      Fig 5: Identifying Manual Valve
      G05591414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals