Second Brake Piston: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
1. Using SST and a press, remove the snap ring from the 2nd brake piston.
  SST 09387-00060
2. Remove the 2nd brake return spring from the 2nd brake cylinder.
  
  Fig 1: Identifying 2nd Brake Return Spring From 2nd Brake Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2nd brake piston return spring subassembly from the 2nd brake cylinder.
  
  Fig 2: Identifying 2nd Brake Piston Return Spring Subassembly And 2nd Brake Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE 2ND BRAKE PISTON
1. Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm² , 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.
  
  Fig 3: Identifying Compressed Air To 2nd Brake Cylinder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE 2ND BRAKE CYLINDER O-RING
1. Using a screwdriver, remove the 2 O-rings from the 2nd brake cylinder.
  
  Fig 4: Identifying O-Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002