Park / Neutral Position Switch: Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Disconnect the park/neutral position switch connector.
- Measure the resistance with the shift lever in each position.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
STANDARD RESISTANCE SPECIFICATIONShift Position Tester Connection Specified Connection P 2 - 6 and 4 - 5 Below 1 Ω Except P ↑ 10 kΩ or higher R 2 - 1 Below 1 Ω Except R ↑ 10 kΩ or higher N 2 - 9 and 4 - 5 Below 1 Ω Except N ↑ 10 kΩ or higher D and 3 2 - 7 Below 1 Ω Except D and 3 ↑ 10 kΩ or higher 2 2 - 3 Below 1 Ω Except 2 ↑ 10 kΩ or higher L 2 - 8 Below 1 Ω Except L ↑ 10 kΩ or higher