Oil Pump: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT OIL PUMP BODY O-RING
1. Remove the front oil pump O-ring from the oil pump.
  
  Fig 1: Identifying Front Oil Pump O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STATOR SHAFT ASSEMBLY
1. Using "Torx" socket wrench T30, remove the 10 "Torx" screws.
  
  Fig 2: Identifying "Torx" Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVE GEAR
1. Remove the front oil pump drive gear from the oil pump body.
  
  Fig 3: Identifying Front Oil Pump Drive Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVEN GEAR
1. Remove the front oil pump driven gear from the oil pump body.
  
  Fig 4: Identifying Front Oil Pump Driven Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP OIL SEAL
1. Using SST, remove the front oil pump oil seal from the oil pump body.
  SST 09308-00010
  
  Fig 5: Identifying Front Oil Pump Oil Seal From Oil Pump Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH DRUM OIL SEAL RING
1. Using a screwdriver, remove the 2 clutch drum oil seal rings from the stator shaft assembly.
  
  Fig 6: Identifying Clutch Drum Oil Seal Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002