Floor Shift Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Install the indicator light wire onto the shift lock control unit.
  
  Fig 1: Identifying Indicator Light Wire Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LOCK RELEASE BUTTON
1. Install the shift lock release button and spring onto the shift lock control unit.
  
  Fig 2: Identifying Shift Lock Release Button
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
1. Install No. 2 position indicator slide cover onto the position indicator slide cover.
  
  Fig 3: Identifying No. 2 Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POSITION INDICATOR SLIDE COVER
1. Install the position indicator slide cover onto the shift lock control unit.
  
  Fig 4: Identifying Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 CONTROL POSITION INDICATOR PLATE
1. Install position indicator plate onto the upper position indicator housing.
  
  Fig 5: Identifying Claws Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER POSITION INDICATOR HOUSING
1. Install the upper position indicator housing onto the shift lock control unit.
  NOTE: Securely engage the 4 claws.
  
  Fig 6: Identifying Claws Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LEVER CAP
1. Install the shift lever cap onto the position indicator housing upper.
  
  Fig 7: Identifying Position Indicator Housing Upper
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002