LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Automatic Transmission - U340E) >> Automatic Transaxle System >> DTC P2757 Torque Converter Clutch Pressure Control Solenoid Performance (Shift Solenoid Valve SLU) >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

OFF malfunction: 

TYPICAL MALFUNCTION THRESHOLDS

Engine speed - Input (turbine) speed (NE - NT) 100 rpm or more

[ON malfunction] 

2 detections are necessary per driving cycle.

1st detection: Temporary flag ON

2nd detection: Pending fault code ON

Vehicle speed must be under 6.2 mph (10 km/h) once before 2nd detection.

ON malfunction: 

TYPICAL MALFUNCTION THRESHOLDS

Difference between engine speed and Input (turbine) speed Less than 35 rpm