Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
[ON malfunction]
Detection condition: Total accumulated time of ON malfunctions (a), (b), (c) and (d) is 1 second or more
ON malfunction (a):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NO x 1st gear ratio NT: Input (turbine) speed NO: Internal counter shaft speed |
More than 300 rpm at output speed of 1000 rpm (Conditions vary with output speed) |
| Duration | 0.85 seconds or more |
ON malfunction (b):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NO x 2nd gear ratio | More than 300 rpm at output speed of 1000 rpm (Conditions vary with output speed) |
| Duration | 0.85 seconds or more |
ON malfunction (c):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NO x 3rd gear ratio | More than 300 rpm at output speed of 1000 rpm (Conditions vary with output speed) |
| Duration | 0.85 seconds or more |
ON malfunction (d):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NO x 4th gear ratio | More than 300 rpm at output speed of 1000 rpm (Conditions vary with output speed) |
| Duration | 0.85 seconds or more |