Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
P0973: Range check (Low resistance)
TYPICAL ENABLING CONDITIONS
| The monitor runs whenever the following DTCs are not present. | None |
| Solenoid | ON |
| Time after solenoid OFF to ON | More than 0.008 seconds |
P0974: Range check (High resistance)
TYPICAL ENABLING CONDITIONS
| The monitor runs whenever the following DTCs are not present. | None |
| Solenoid | OFF |
| Time after solenoid ON to OFF | More than 0.008 seconds |