LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Door Lock) >> Wireless Door Lock Control System >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON and turn the tester on.
    3. Select the following menu items: Body Electrical / Main Body / Trouble Codes.
    4. Check DTCs and then write them down.

      HINT:

      Refer to Techstream operator's service information for further details.

    5. Confirm the details of the DTCs (see DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch ON (do not start the engine) and turn Techstream on.
    3. Select the following menu items: Body Electrical / Main Body / Trouble Codes.
    4. Erase the DTCs.
scientia non olet · About LEMON Manuals