LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Door Lock) >> Wireless Door Lock Control System >> Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Record the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Wireless door lock control system; 

    CUSTOMIZE PARAMETERS

    Display (Item) Default Contents Setting
    Hazard Answer Back ON When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice ON / OFF
    Wireless Buzzer Resp ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK / UNLOCK switch pressed ON / OFF
    Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds ON / OFF
    Wireless Control ON ON / OFF of wireless door lock function ON / OFF
    Panic Function ON Operates security alarm when PANIC switch on transmitter continuously pressed for 1 second ON / OFF
    Unlock 2 Operation ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON / OFF
    Auto Lock Time 30s This function controls amount of time from unlocking doors to automatic re-locking function 30s / 60s