LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Door Lock) >> Power Door Lock Control System >> Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) 

    HINT:

    The following item can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Power door lock control system: 

    CUSTOMIZE PARAMETERS

    Tester Display Default Function Setting
    Unlock Key Twice ON Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors. ON/OFF