Door Control Transmitter Module: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL DOOR CONTROL TRANSMITTER MODULE
NOTE: Take extra care when handling these precision electronic components.

Fig 1: Installing Door Control Transmitter Module
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMITTER HOUSING COVER
1. Install the transmitter housing cover to the transmitter housing case.
2. Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times.
  OK:
  
  Transmitter's LED illuminates 3 times when switch is pressed 3 times.
  
  Fig 2: Installing Transmitter Housing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002