Tire And Wheel System: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT TIRE
1. Check the tires for wear and proper inflation pressure.
  Standard cold tire inflation pressure: 220 kPa (2.2 kgf/cm ² , 32 psi)
2. Using a dial indicator, check the runout of the tires.
  Standard tire runout: 1.0 mm (0.039 in.) or less
  
  Fig 1: Checking Tire Runout
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ROTATE TIRE
HINT:

See the illustration for tire rotation.

Fig 2: Identifying Tire Rotation
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT WHEEL BALANCE
1. Check and adjust the off-the-car balance.
  Standard imbalance after adjustment: 8.0 g (0.018 lb) or less
CHECK FRONT AXLE HUB BEARING (See ON-VEHICLE INSPECTION )
CHECK BEARING BACKLASH AND AXLE HUB DEVIATION (See ON-VEHICLE INSPECTION )