Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

RECONFIRM DTC

Clear the DTC (s) (see DTC CHECK / CLEAR ).
Start the engine.
Drive the vehicle at 6 km/h (4 mph) or more to activate the initial check.

Check if the same DTC (s) is output (see DTC CHECK / CLEAR ).

Result

DTC RESULT DESCRIPTION

Result	Proceed to
DTC is output	A
DTC is not output	B

HINT:

The DTCs may be stored due to a malfunction in the connector terminal.

B: END

A: REPLACE ABS AND TRACTION ACTUATOR