TRACTION CONTROL SWITCH (for 2WD): Removal

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE TRACTION CONTROL SWITCH (AUTO LSD SWITCH)
1. Detach the 2 claws and remove the switch.
  
  Fig 1: Identifying Claws And Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002