LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Brake Control) >> TRACTION CONTROL SWITCH (for 2WD) >> Installation

TRACTION CONTROL SWITCH (for 2WD): Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRACTION CONTROL SWITCH (AUTO LSD SWITCH) 
    1. Attach the 2 claws to install the switch.
    Fig 1: Identifying Claws And Switch
    G05585133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals