SKID CONTROL SENSOR (for 2WD): Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SKID CONTROL SENSOR
- Check the speed sensor. If any of the following occurs, replace the speed sensor with a new one.
- The surface of the speed sensor is cracked, dented, or chipped.
- The speed sensor has been dropped.
- Check the speed sensor. If any of the following occurs, replace the speed sensor with a new one.
- INSPECT SKID CONTROL SENSOR WIRE
- Check the sensor wire. If any of the following occurs, replace the sensor wire with a new one. The connector or wire harness is scratched, cracked, or damaged.