LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Brake Control) >> Abs And Traction Actuator >> Disassembly

Abs And Traction Actuator: Disassembly

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY 
    1. Remove the 2 nuts and actuator from the bracket.
    Fig 1: Identifying Nuts And Actuator
    G05585080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BRAKE ACTUATOR BOLT HOLDER 
    1. Remove the 2 bolt holders from the actuator.
  3. REMOVE BRAKE ACTUATOR BOLT CUSHION 
    1. Remove the 3 cushions from the actuator.
scientia non olet · About LEMON Manuals