UNDERDRIVE Planetary Gear: Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD
- Using SST a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.
SST 09387-00050, 09564-16020
Torque: Standard turning torque at 60 rpm 0.23 to 5.01 N*m (2 to 51 kgf*cm, 2.0 to 44.3 in.*lbf)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).
- Using SST a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.