LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Automatic Transmission - U241E) >> Park / Neutral Position Switch >> Adjustment

Park / Neutral Position Switch: Adjustment

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Loosen the 2 bolts of the switch and set the shift lever to the N position.
    2. Align the groove and neutral basic line.
      3. Fig 1: Identifying Groove And Neutral Basic Line
      G05584154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Hold the switch in this position and tighten the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    4. After adjustment, perform the inspection (see ON-VEHICLE INSPECTION  ).
scientia non olet · About LEMON Manuals