Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
P0982: Range check (Low resistance)
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present. | None |
| Shift solenoid valve S4 | ON |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
P0983: Range check (High resistance)
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present | None |
| Shift solenoid valve S4 | OFF |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |