LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Automatic Transmission - U241E) >> Automatic Transaxle System >> DTC P0746 Pressure Control Solenoid "A" Performance (Shift Solenoid Valve SL1) >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

All 

TYPICAL ENABLING CONDITIONS

Transmission range "D"
ECT (Engine coolant temperature) 60°C (140°F) or more
ATF temperature -20°C (-4°F) or more
ATF temperature sensor circuit Not circuit malfunction
ECT sensor circuit Not circuit malfunction
Turbine speed sensor circuit Not circuit malfunction
Intermediate shaft speed sensor circuit Not circuit malfunction
Output speed sensor circuit Not circuit malfunction
Shift solenoid valve SL1 circuit Not circuit malfunction
Shift solenoid valve SL2 circuit Not circuit malfunction
Shift solenoid valve S4 circuit Not circuit malfunction
Electronic throttle system Not circuit malfunction

OFF malfunction 

TYPICAL ENABLING CONDITIONS

ECM selected gear 1st
Vehicle speed 10 to 40 km/h (6.2 to 24.9 mph)
Throttle valve opening angle 4.5 % or more (varies with engine speed)

ON malfunction (A) 

TYPICAL ENABLING CONDITIONS

ECM selected gear 2nd
Vehicle speed 10 km/h (6.2 mph) or more
Throttle valve opening angle 4.5 % or more (varies with engine speed)

ON malfunction (B) 

TYPICAL ENABLING CONDITIONS

ECM lock-up command OFF
ECM selected gear 3rd or 4th