Park / Neutral Position Switch: Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Measure the resistance of the switch when the shift lever is moved to each position.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
RESISTANCE SPECIFICATIONTester Connection Shift Lever Position Specified Condition 6 (PL) - 2 (RB) P Below 1 Ω 6 (PL) - 2 (RB) Not on P 10 kΩ or higher 1 (RL) - 2 (RB) R Below 1 Ω 1 (RL) - 2 (RB) Not on R 10 kΩ or higher 9 (NL) - 2 (RB) N Below 1 Ω 9 (NL) - 2 (RB) Not on N 10 kΩ or higher 7 (DL) - 2 (RB) D Below 1 Ω 7 (DL) - 2 (RB) Not on D 10 kΩ or higher 3 (2L) - 2 (RB) 2 Below 1 Ω 3 (2L) - 2 (RB) Not on 2 10 kΩ or higher 8 (LL) - 2 (RB) L Below 1 Ω 8 (LL) - 2 (RB) Not on L 10 kΩ or higher
- Measure the resistance of the switch when the shift lever is moved to each position.