LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Automatic Transmission - U151F) >> Floor Shift Assembly >> Disassembly

Floor Shift Assembly: Disassembly

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER POSITION INDICATOR HOUSING 
    1. Detach the 4 claws and remove the housing.
      2. Fig 1: Identifying Lower Position Indicator Housing With Claws
      G05582349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the position indicator slide cover with slide No. 2 cover.
  2. REMOVE POSITION INDICATOR LIGHT HOUSING 
    1. Detach the 2 claws and remove the indicator light housing from the floor shift position indicator housing.
      2. Fig 2: Identifying Indicator Light Housing With Claws
      G05582350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY 
  4. REMOVE SHIFT LOCK RELEASE BUTTON 
    1. Detach the 2 claws and remove the button and spring from the position indicator light housing.
      2. Fig 3: Identifying Shift Lock Release Button With Claws
      G05582355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals