Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Either of the following conditions is met: OFF malfunction (A), (B), (C) and (D), or ON malfunction (A), (B) and (C)
OFF malfunction (A):
TYPICAL MALFUNCTION THRESHOLDS
| Difference between engine speed and input (turbine) speed | Less than 35 rpm |
OFF malfunction (B) and (C):
TYPICAL MALFUNCTION THRESHOLDS
| Input (turbine) speed/Intermediate shaft speed | 0.93 to 1.07 |
OFF malfunction (D):
TYPICAL MALFUNCTION THRESHOLDS
| Input (turbine) speed/Intermediate shaft speed | 0.64 to 0.74 |
ON malfunction (A):
TYPICAL MALFUNCTION THRESHOLDS
| Input (turbine) speed/Intermediate shaft speed | 2.72 to 2.86 |
ON malfunction (B):
TYPICAL MALFUNCTION THRESHOLDS
| Input (turbine) speed - Intermediate shaft speed | 700 rpm or more |
ON malfunction (C):
TYPICAL MALFUNCTION THRESHOLDS
| Input (turbine) speed - Intermediate shaft speed | Less than - 500 rpm or 700 rpm or more |