DTC P0748 Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1): Description
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Shifting from 1st to 5th is performed in combination with the ON and OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR, which are controlled by the ECM. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated safely (see FAIL-SAFE CHART ).
DTC DETECTION CONDITION AND TROUBLE AREA REFERENCE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0748 | Duty cycle to shift solenoid valve SL1 is 100% (1 trip detection logic) |
|