Typical Enabling Conditions
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
| System guard* | ON |
| *System guard sets when the following conditions are met: | - |
| Throttle actuator | ON |
| Throttle actuator duty calculation | Executing |
| TP sensor | Fail determined |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or more |
| Throttle actuator | Fail determined |