DTC P0500 Vehicle Speed Sensor "A": Description
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU. The skid control ECU converts these wheel speed signals into a 4-pulse signal and outputs it to the ECM via the combination meter. The ECM determines the vehicle speed based on the frequency of these pulse signals.
DTC DETECTION CONDITIONS AND TROUBLE AREAS
| DTC No. | DTC Detection Conditions | Trouble Areas |
|---|---|---|
| P0500 | While vehicle being driven, no vehicle speed sensor signal transmitted to ECM (1 trip detection logic) |
|