Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE MASS AIR FLOW METER
1. Disconnect the mass air flow meter connector.
2. Remove the 2 screws and mass air flow meter.
  
  Fig 1: Identifying Mass Air Flow Meter Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002