Shift Lock System: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT KEY INTERLOCK SOLENOID

Fig 1: Identifying Key Interlock Solenoid Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the solenoid connector.
2. Connect the battery's positive (+) lead to terminal 1 (UN+) and the battery's negative (-) lead to terminal 2 (UN-).
  Check that the operating noise of the solenoid can be heard.
  
  If the result is not as specified, replace the solenoid.