Oil Pump: Disassembly

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT OIL PUMP ASSEMBLY (See INSPECTION )
REMOVE CLUTCH DRUM OIL SEAL RING
1. Remove the 2 clutch drum oil seal rings.
  
  Fig 1: Identifying Clutch Drum Oil Seal Rings
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STATOR SHAFT ASSEMBLY
1. Using a T30 "TORX" socket, remove the 11 bolts and stator shaft. Keep the gears in assembling order.
Fig 2: Locating Stator Shaft Assembly Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT CLEARANCE OF OIL PUMP ASSEMBLY (See INSPECTION )
REMOVE FRONT OIL PUMP DRIVE GEAR
1. Remove the front oil pump drive gear.
  
  Fig 3: Locating Front Oil Pump Drive Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP DRIVEN GEAR
1. Remove the front oil pump driven gear.
  
  Fig 4: Locating Front Oil Pump Driven Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP BODY O-RING
1. Using a screwdriver, pry out the O-ring.
  HINT:
  
  Tape the screwdriver before use.
  
  Fig 5: Identifying Prying Out O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT OIL PUMP OIL SEAL
1. Mount the oil pump in a soft jaw vise.
2. Using SST, tap out the oil seal from the oil pump body.
  SST 09308-00010
INSPECT FRONT OIL PUMP AND GEAR BODY SUBASSEMBLY (See INSPECTION )
INSPECT STATOR SHAFT ASSEMBLY (See INSPECTION )