LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Automatic Transmission - U140F) >> Floor Shift Assembly >> Reassembly

Floor Shift Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT LOCK RELEASE BUTTON 
    1. Install the spring and button and attach the claws to the position indicator light housing.
      2. Fig 1: Identifying Shift Lock Release Button
      G05582355Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY 
  3. INSTALL POSITION INDICATOR LIGHT HOUSING 
    1. Attach the indicator light housing to the shift position indicator housing with the 2 claws.
      Fig 2: Identifying Position Indicator Light Housing
      G05582350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL LOWER POSITION INDICATOR HOUSING 
    1. Install the position indicator slide cover with slide cover No. 2 to the indicator housing.
    2. Attach the housing to the floor shift assembly with the 4 claws.
      Fig 3: Identifying Position Indicator Slide Cover Claws
      G05582349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals