Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
[ON malfunction]
Detection condition: Total accumulated time of ON malfunctions (a), (b), (c) and (d) is 1 second or more
ON malfunction (a):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NC x 1st gear ratio (without counter gear and under drive gear) NT: Input (turbine) speed NC: Counter gear speed |
More than 300 rpm at counter gear speed of 1,000 rpm (Conditions vary with counter gear speed) |
| Duration | 0.85 seconds or more |
ON malfunction (b):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NC x 2nd gear ratio (without counter gear and under drive gear) | More than 300 rpm at counter gear speed of 1,000 rpm * (Conditions vary with counter gear speed) |
| Duration | 0.85 seconds or more |
ON malfunction (c):
TYPICAL MALFUNCTION THRESHOLDS
| NT - NC x 3rd gear ratio (without counter gear and under drive gear) | More than 300 rpm at counter gear speed of 1,000 rpm (Conditions vary with counter gear speed) |
| Duration | 0.85 seconds or more |
ON malfunction (d):
TYPICAL MALFUNCTION THRESHOLDS
| NC - NO x Counter gear ratio x under drive gear ratio (Low or High) | More than 300 rpm at output speed of 1,000 rpm (Conditions vary with output speed) |
| Duration | 0.85 seconds or more |