DTC P0982 Shift Solenoid "D" Control Circuit Low (Shift Solenoid Valve S4); DTC P0983 Shift Solenoid "D" Control Circuit High (Shift Solenoid Valve S4): Description
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Shifting from 1st to 4th is performed in combination with the ON and OFF operation of the shift solenoid valves SL1 and SL2, which are controlled by the ECM. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated safely (See FAIL-SAFE CHART ).
DTC DETECTION CONDITION AND TROUBLE AREA REFERENCE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0982 | ECM detects short in solenoid valve S4 circuit 2 times when solenoid valve S4 is operated (1 trip detection logic) |
|
| P0983 | ECM detects open in solenoid valve S4 circuit 2 times when solenoid valve S4 is not operated (1 trip detection logic) |
|