LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Automatic Transmission - U140F) >> Automatic Transaxle System >> DTC P0711 Transmission Fluid Temperature Sensor "A" Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

All 

TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present None
P0110-P0113: IAT sensor
P0115-P0118: ECT sensor
P0710-P0713: Trans fluid temperature sensor

Condition 1 

TYPICAL ENABLING CONDITIONS

Time after engine start 17 minutes or more
ECT -15°C (5°F) or more
Driving distance after engine start 9 km (5.6 miles) or more
IAT (12 sec. after engine start) -10°C (14°F) or more
ECT (12 sec. after engine start) -10°C (14°F) or more

Condition 2 

TYPICAL ENABLING CONDITIONS

ECT 60°C (140°F) or more
ECT (12 sec. after engine start) Less than 35°C (95°F)