Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Condition (A)
TYPICAL MALFUNCTION THRESHOLDS
| Number of the following signal input at the same time | 2 or more |
| P switch | ON |
| N switch | ON |
| R switch | ON |
| D switch | ON |
| 3 switch | ON |
| 2 switch | ON |
Condition (B)
TYPICAL MALFUNCTION THRESHOLDS
| Number of the following signal input at the same time | 2 or more |
| NSW switch | ON |
| R switch | ON |
| D switch | ON |
| 3 switch | ON |
| 2 switch | ON |
Condition (C)
TYPICAL MALFUNCTION THRESHOLDS
| When all of the following conditions are met | - |
| P switch | OFF |
| N switch | OFF |
| NSW switch | OFF |
| R switch | OFF |
| D switch | OFF |
| 3 switch | OFF |
| 2 switch | OFF |
Condition (D)
TYPICAL MALFUNCTION THRESHOLDS
| When both conditions (a) and (b) are met | - |
| (a) When one of following condition is met | - |
| NSW switch | ON |
| P switch | ON |
| N switch | ON |
| R switch | ON |
| (b) When one of following condition is met | - |
| 4 switch | ON |
| L switch | ON |