On-Vehicle Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BLOWER MOTOR CONTROL
- Measure the resistance of the blower resistor.
Standard resistance
RESISTANCE SPECIFICATION
| Tester Connection |
Specified Condition |
| 1 - 2 |
1.45 to 1.67 Ω |
| 1 - 3 |
0.52 to 0.60 Ω |
| 1 - 4 |
3.12 to 3.60 Ω |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the resistance is not as specified, replace the blower motor control.