On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT BLOWER MOTOR (for Automatic Air Conditioning System)
1. Disconnect the blower motor connector.
2. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and then check that the motor operates smoothly.
  If the operation is not as specified, replace the blower motor.
  
  Fig 1: Identifying Blower Motor Terminals (For Automatic Air Conditioning System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT BLOWER MOTOR (for Manual Air Conditioning System)
1. Disconnect the blower motor connector.
2. Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 1, and then check that the motor operates smoothly.
  If the operation is not as specified, replace the blower motor.
  
  Fig 2: Identifying Blower Motor Terminals (For Manual Air Conditioning System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002