DTC Check / Clear

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
1. Connect Techstream to the DLC3.
2. Turn the ignition switch ON and turn Techstream ON.
3. Read the DTC by following the prompts on the tester screen.
  HINT:
  
  Refer to Techstream operator's article for further details.
CLEAR DTC
1. Connect Techstream to the DLC3.
2. Turn the ignition switch ON and turn Techstream ON.
3. Clear the DTC by following the prompts on the tester screen.
  HINT:
  
  Refer to Techstream operator's article for further details.