LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Air Conditioning) >> AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) >> Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

Air conditioning system 

AIR CONDITIONING SYSTEM - TROUBLESHOOTING CHART

Display Default Contents Setting
Set Temperature Shift NORMAL To control with shifted temperature against display temperature +2 C / +1 C / NORMAL / -1 C / -2 C
Air Inlet Mode AUTO In case of turning A/C ON when you desire to make compartment cool down quickly, this is function to change mode automatically to RECIRCULATION mode MANUAL/AUTO
Compressor / Air Inlet DEF Operation LINK Function to turn A/C ON automatically linked with FRONT DEF button when A/C is OFF NORMAL / LINK
Evaporator Control AUTO Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up MANUAL/AUTO
Foot / DEF Automatic Blow up Function ON Function to change blower level automatically when defroster is ON OFF/ON
Ambient Temperature Shift Normal To control with shifted ambient temperature against display ambient temperature. +3 C / +2 C / +1 C / Normal / -1 C / -2 C / -3 C