Floor Shift Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SHIFT LOCK RELEASE BUTTON
1. Install the spring and button and attach the claws to the position indicator light housing.
Fig 1: Identifying Shift Lock Release Button Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
INSTALL POSITION INDICATOR LIGHT HOUSING
1. Install the indicator light housing and attach the 2 claws to the shift position indicator housing.
  
  Fig 2: Identifying Indicator Light Wire Sub-Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER POSITION INDICATOR HOUSING
1. Install the position indicator slide cover with slide No. 2 cover to the indicator housing.
2. Install the housing and attach the 4 claws to the floor shift assembly.
  
  Fig 3: Identifying Lower Position Indicator Housing Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002